Wähle ein anderes Land, um Inhalte für deinen Standort zu sehen.
Sehr geehrte Damen und Herren,

bis zum 19.12.2023 können Sie Ihre Bestellungen wie gewohnt aufgeben. Nach einer kurzen Weihnachtspause sind wir ab dem 02.01.2024 wieder für Sie da.

Vielen Dank für Ihr Verständnis.
Freundliche Grüße RHODIUS Abrasives Team

Diamond discs

Our product selection

Top seller

The LD50 is the high-performance tool for the cost-conscious user. It achieves good cutting times in concrete, while also offering a good lifetime. Laser-welded. Suitable for wet and dry cutting. • Good cutting times • Good lifetime...
Wall slot in a single step. The LD404 ALL IN ONE EXTENDED as an update to the LD402/LD403 is perfectly equipped with a combination of two-times-two diamond qualities. The turbo segments of the straight diamond cutting discs on the...

All products in the diamond cutting disc range

The filters shown below make searching really simple.
The filters from your rough selection are already pre-configured as appropriate.

Close filters
Filter:
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
LD300
straight
straight
The LD300 offers maximum performance and an optimised lifetime for a very broad range of applications ranging from medium-hard to hard materials. This product has been specially developed for angle grinder use. The 12 mm segments feature...
Concrete Concrete
Segment height for segmented diamond cutting discs
RHODIUS_pic_LD403S_125_4011890082515_p03.tif[33357]
3x milling unit
3x milling unit
Wall slot in a single step. The turbo segments of the straight diamond cutting discs on the outside allow for particularly clean and straight wall chasing. The wave geometry of the inner diamond cutting discs gives you a perfectly clear...
Concrete Concrete
Segment height for segmented diamond cutting discs
DG35 X-LOCK
straight
straight
The high-performance diamond cutting disc DG35 with continuous turbo rim offers an impressively long lifetime, high cutting speed and a wide range of possible applications from granite to concrete. At the same time, its 10 mm high...
Natural stone Natural stone
Segment height for diamond cutting discs with closed cutting edge
RHODIUS_pic_DG50X-LOCK_125_4011890124505_p01.tif[27130]
straight
straight
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean...
Tiles/ceramics Tiles/ceramics
Segment height for diamond cutting discs with closed cutting edge
RHODIUS_pic_DG15X-LOCK_125_4011890124352_p01.tif[27131]
straight
straight
With a segment width of 1.4 mm, the DG15 is able to achieve very high cutting speeds. Due to the special diamond bond within the 10 mm high segments, it is particularly suited for cutting high-fired tiles, stoneware and ceramics. In this...
Tiles/ceramics Tiles/ceramics
Segment height for diamond cutting discs with closed cutting edge
RHODIUS_pic_LD40X-LOCK_125_4011890124529_p01.tif[27126]
straight
straight
The LD40 enables high cutting speeds and short cutting times on a wide range of materials from concrete to granite. The 12 mm high diamond segments of the LD40 are laser welded to the steel core of the disc. Suitable for wet and dry...
Concrete Concrete
Segment height for segmented diamond cutting discs
LD404 ALL IN ONE
4x milling unit
4x milling unit
Wall slot in a single step. The LD404 ALL IN ONE EXTENDED as an update to the LD402/LD403 is perfectly equipped with a combination of two-times-two diamond qualities. The turbo segments of the straight diamond cutting discs on the...
Concrete Concrete
Segment height for segmented diamond cutting discs
RHODIUS_sce_Screenshot_LD300_application_2_2020_1280x720px.jpg[28233]
straight
straight
The LD300 offers maximum performance and an optimised lifetime for a very broad range of applications ranging from medium-hard to hard materials. This product has been specially developed for angle grinder use. The 12 mm segments feature...
Concrete Concrete
Segment height for segmented diamond cutting discs
DG55
straight
straight
The all-round tool DG55 provides the user with a very good price-performance ratio in the area of natural stones. The continuous turbo rim allows fast working and clean cutting edges. Suitable for wet and dry cutting. Diamond cutting...
Natural stone Natural stone
Segment height for diamond cutting discs with closed cutting edge
DG70
straight
straight
With the DG70, the user gets an attractive tool for concrete, which offers an impressive price-performance ratio. Suitable for wet and dry cutting. • Good value for money • Wet and dry cutting • Sintered Machine suitability: The DG70...
Concrete Concrete
Segment height for segmented diamond cutting discs
LD50
straight
straight
The LD50 is the high-performance tool for the cost-conscious user. It achieves good cutting times in concrete, while also offering a good lifetime. Laser-welded. Suitable for wet and dry cutting. • Good cutting times • Good lifetime •...
Concrete Concrete
Segment height for segmented diamond cutting discs
LD40
straight
straight
The LD40 enables high cutting speeds and short cutting times on a wide range of materials from concrete to granite. The 12 mm high diamond segments of the LD40 are laser welded to the steel core of the disc. Suitable for wet and dry...
Concrete Concrete
Segment height for segmented diamond cutting discs
1 From 3

Consumers are shown prices including VAT (gross), and companies are shown prices excluding VAT (net).