Wähle ein anderes Land, um Inhalte für deinen Standort zu sehen.
Sehr geehrte Damen und Herren,

bis zum 19.12.2023 können Sie Ihre Bestellungen wie gewohnt aufgeben. Nach einer kurzen Weihnachtspause sind wir ab dem 02.01.2024 wieder für Sie da.

Vielen Dank für Ihr Verständnis.
Freundliche Grüße RHODIUS Abrasives Team

Diamond discs

Our product selection

Top seller

The LD50 is the high-performance tool for the cost-conscious user. It achieves good cutting times in concrete, while also offering a good lifetime. Laser-welded. Suitable for wet and dry cutting. • Good cutting times • Good lifetime...
Wall slot in a single step. The LD404 ALL IN ONE EXTENDED as an update to the LD402/LD403 is perfectly equipped with a combination of two-times-two diamond qualities. The turbo segments of the straight diamond cutting discs on the...

All products in the diamond cutting disc range

The filters shown below make searching really simple.
The filters from your rough selection are already pre-configured as appropriate.

Close filters
Filter:
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
LD45
straight
straight
The LD45 is specifically developed for use on table saws and petrol cut-off saws. Due to its high cutting speed and long lifetime, it offers impressive performance on materials ranging from hard concrete with aggregates to soft concrete...
Concrete Concrete
Segment height for segmented diamond cutting discs
LD200 SPEED
straight
straight
The LD200 SPEED was developed for use on light joint cutter and is especially suitable for comfortable cutting of reinforced concrete and also hard concrete with aggregates. Thanks to the forged segments, the vibrations are reduced to a...
Concrete Concrete
Segment height for segmented diamond cutting discs
DG35
straight
straight
The high-performance diamond cutting disc DG35 with continuous turbo rim offers an impressively long lifetime, high cutting speed and a wide range of possible applications from granite to concrete. At the same time, its 10 mm high...
Natural stone Natural stone
Segment height for diamond cutting discs with closed cutting edge
LD4
straight
straight
The LD4 is equipped with 12 mm high turbo segments and is particularly convincing due to its excellent cutting ability in materials from granite to concrete. Laser-welded. Suitable for wet and dry cutting. • 12 mm segment height • Long...
Natural stone Natural stone
Segment height for segmented diamond cutting discs
LD410 SPEED
straight
straight
With its 17 mm high diamond segments, the LD410 SPEED achieves an extra-long lifetime in materials from granite to concrete. The LD410 SPEED enables particularly comfortable cutting as the vibrations have been reduced to a minimum with...
Natural stone Natural stone
Segment height for segmented diamond cutting discs
DG50
straight
straight
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean...
Tiles/ceramics Tiles/ceramics
Segment height for diamond cutting discs with closed cutting edge
DG25
straight
straight
The DG25 is a electroplated special cutting disc and optimised for marble. It achieves short cutting times and a long lifetime. The DG25 makes very precise work much easier. Optimal free cut results in clean cutting edges. Suitable for...
Tiles/ceramics Tiles/ceramics
Segment height for diamond cutting discs with closed cutting edge
DG45
straight
straight
With its smooth continuous rim, the DG45 enables short cutting times, particularly smooth cutting and very clean cutting edges. The DG45 was specifically developed for dry cutting applications and shows its full potential in this area...
Tiles/ceramics Tiles/ceramics
Segment height for diamond cutting discs with closed cutting edge
LD1
straight
straight
The LD1 ensures a cool, fast and particularly precise cut – with a smooth continuous rim and clean cutting edge. At the same time, dust generation during dry cutting is reduced to a minimum. Suitable for wet and dry cutting. • Low dust...
Tiles/ceramics Tiles/ceramics
Segment height for diamond cutting discs with closed cutting edge
DG15
straight
straight
With a segment width of 1.4 mm, the DG15 is able to achieve very high cutting speeds. Due to the special diamond bond within the 10 mm high segments, it is particularly suited for cutting high-fired tiles, stoneware and ceramics. In this...
Tiles/ceramics Tiles/ceramics
Segment height for diamond cutting discs with closed cutting edge
DG10
straight
straight
The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of...
Tiles/ceramics Tiles/ceramics
Segment height for segmented diamond cutting discs
LD60
straight
straight
The LD60 is equipped with 11 mm high diamond segments. The wear protection segments used here on the LD60 reduce under-cutting of the steel core and a particularly high standard of safety is achieved. The forged segments reduce the...
Asphalt Asphalt
Segment height for segmented diamond cutting discs
2 From 3

Consumers are shown prices including VAT (gross), and companies are shown prices excluding VAT (net).