Cutting disc with ceramic abrasive grain. For aggressive cutting performance and a long lifetime with high-volume cutting.

• Cutting disc with ceramic abrasive grain
• High cutting speed
• Little burr formation

Machine suitability:
The XT100 cutting disc is suitable for freehand use on angle grinders.

Material suitability:
The XT100 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels.

Structure and production:
The cutting disc includes premium sintered corundum and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts.

Quality:
With the XT100, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.

Applications:
The XT100 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, especially light and fast cut. The disc features minimal sparking, low dust generation and vibration-free operation that offers exceptional stability. All of which makes work easier and is especially cost-effective. High-precision, high-speed processing of thin-walled material is easily achieved. This product offers an ideal price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports, sections, panels and beams.

Dimensions:
The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm.

Industries:
This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Notice:
The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.