Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio.

• Reduced burr formation
• High cutting speed
• Fewer sparks
• Low edge cavitation

Machine suitability::
The XT69 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines).

Material suitability::
The XT69 has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc.

Construction and manufacture::
The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts.

Quality::
The XT69 MULTI gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades.

Application::
The XT69 offers impressive performance with an aggressive cut. High-precision processing of thin-walled material is easily achieved. The disc features minimal sparking and very smooth, vibration-free operation. The XT69 MULTI makes work easier. This high-quality RHODIUS tool is an especially good choice for cutting structural steel, painted sheet metal, galvanised structural parts, cable ducts, sections and beams.

Dimensions::
The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 105 mm to 230 mm.

Industry::
This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work.