Enables cutting and grinding in one step – with a disc thickness of 1.9 mm.

• Extra-thin cutting and grinding with a single disc
• Suitable for a variety of materials
• Three full-face fabric layers for extra safety

Machine suitability:
The XTK69 MULTI CROSS combination disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines).

Material suitability:
The XTK69 MULTI CROSS has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc.

Structure and production:
The combination disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 3 full-coverage glass cloth layers. For this disc, the minimum side load as defined by EN 12413 and oSa is 290 N with grinding disc approval. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a depressed shape with grinding disc approval (shape 27).

Quality:
The XTK69 MULTI CROSS gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades.

Applications:
The disc is approved for both cutting and grinding work. The XT69 MULTI CROSS offers impressive performance with an aggressive cut. A key characteristic of this disc is its extremely low level of vibration. The XTK69 MULTI CROSS makes work easier. This quality RHODIUS tool is an especially good choice for cutting structural steel, sections and beams.

Dimensions:
This combination disc is approved for grinding work, and is available in a disc width of 1.9 mm, and in the diameters of 115 mm and 125 mm.

Industries:
This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work.

Notice:
The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.